Your Custom Text Here
Today I made and attached the 2-4th legs and 3 hoofs.
View from the front
Left side view
View from the back
Right side view
The legs are only attached by 1 piece of pencil rebar at this point. Once I know exactly what position I want them in I will attach them at 2-3 more locations.
Pig nose
Building up the nose tip.
Aerial view
Nose and snout
side view
back view
The other side
Front view- pig nose, snout, back and 1 back leg, clipped to rescuer
Side view of rescuer and part of the pig.
View from the back.
Right side view.
Today I adjusted the shoulder width, started the chest and connected the back extensions at the top.
View from the front
View from the back
I might need to trim up his chest tomorrow. Grrrrrr
I started the upper torso.
I always make the shoulders too broad and then have to adjust them. I will do that tomorrow.
My work day was short today.
Today I spent a lot of time cutting off and rewelding. The upper leg/booty was too big. After four hours it now has a trimmer.
I am trying to decide if I need to reinforce the lower half of the body or move on. Once I reinforce the joints it is a lot more difficult to make changes. If I move on without reinforcing the welding joints, the piece could fall apart. That is my dilemma.
Connecting the legs and reinforcing them.
Building the hips and connecting the legs
Side view
View from back
I create triangles to give the piece stability and strength.
Left side view with triangles
View from the back
view of the right side
Using scraps to create triangles to strengthen the ankles.
Looking back, I can now see the hips are not right and are exaggerating the movement. I will have the movement exaggerated when the piece is finished, but for the armature, I will have to tone it down.
This sculpture is about the movement and the energy of rescuing livestock (a pig) during Hurricane Harvey. Today I have to decide on where the figure's weight needs to be to best balance the sculpture and express the energy of hoisting the swine to safety. The photos I took of Griffin while he was walking helped me committe to the foot placement. For the weight, I need new reference photos taken from each side. I am fortunate that my husband is always agreeable to posing for me. We wrapped a stool in a towel to stand in for the pig. Below are the new photos.
View from the front
View of the left side
back view
Step one - I find or take a photo to use as a reference. Many times I take screen shots from videos I find online. This time I took photos of Griffin and Alex. At the time I was planning on sculpting “The Guy In the Astros Cap”. I had Griffin carry Alex and I took photos as he walked. I can still use the pictures of Griffin walking. Alex is too cute and tiny to stand in for the pig. I will have to wing the pig.
Photo if Griffin’s feet.
Step 2- I start with the armature for the feet, piecing them together from the small leftover scraps of my last sculpture.
Left foot, right foot
I really like the pigeon toed aspect of this photo.
Even though I like work from photos I feel free to change anything I want.
You can see the rough coat on the underside of the bench. I am ready for the second application of concrete.
I have flipped the bench over and will work from the top to the bottom. You have to work from the top to the bottom because the process is very messy.
Step 1. Protect the bronze birds by covering them with plastic wrap.
Step 2. Paint the lath with a concrete bonding adhesive.
Step. 3 Make a slip from the concrete and the bonding adhesive. Paint the slip onto the piece.
Step.4 Apply concrete by hand.
Mateo. 5 Remain calm, enjoy the process.
It turns out my bonding adhesive is old, as a result my concrete does not want to stick together. I am grateful I am only working on the scratch coat. I can fix anything that falls off when I apply the final coat.
I like this branch growing around the other
Things did not go as planned as I worked on the bench. My bonding adhesive was old and the cement just was not sticking. And marriages do not go as planned. The lesson here is just roll with it. I will get new bonding adhesive next week and the next application will go smoothly. It is not worth getting upset over. The fun part of marriage is having someone go through the rough spots with you, someone who makes the rough spots not so rough, maybe even fun. Look for the good in every situation, it is there. Make your problems work for you.
My first thought was to make a sculpture to be exhibited with the drawings of a man rescuing a woman and a baby. I loved how obvious it is in this drawing that they are strangers. He is carrying her but with his body language he could be carrying a sack of potatoes. His energy is focused inward, perhaps he is worried about his own family. She is the same, she is affectionate with the baby but she is not snuggling into her rescuer. There is not a history between the rescuer and the girl.
“The guy in the Astros cap”
After some consideration, I have decided to make the sculpture a livestock piece. I changed my mind because I feel the livestock pieces need to be very large to properly convey the extraordinary feats some people went to in order to save their livestock. I also like the fact that it is unexpected to make the sculpture of a pig rescue. I can always make a sculpture from the other drawing later.
“Bringing home the bacon”
“You Make Me Stronger” 12” X 5.75” X 2.25” bronze
photo by Nash Baker
At the end of every semester at Glassell, we clean out all the disheveled cabinets and drawers. We throw away broken tools and parts and reorganize the rest. A few years ago, while cleaning out the hammer and chisel drawer, I came across a worn out sledge hammer. Through the worn garish red paint the satiny steel skin of the mallet was unblemished, it had gotten better with age. Its handle on the other hand had not weathered as well. It resembled more of the rugged surface of old drift wood than a powerful hand tool. Its life had been extended several times with layers of duct tape that were now thread bare. I could only imagine over the years how many passionate sculptors had partnered with this handle and mallet to create their dreams; how many artist used it to mold their creations. I loved it for the history it held in the splintered grains of wood of its handle and the silent strength of its barely-red steel mallet. It’s days of hard labor are over. I bought the school a shiny new blue and yellow sledge hammer with a rubber handle and took the old red maul home to rest. Uncertain of its exact future, it rested on my den coffee table for the better of a year. Guests always comment on what a cool tool it was. It sparked unsolicited stories of hard work, of past labors and stubborn relatives. This summer, I decided to make a mold of the old maul. Each casting will tell a different story. This first casting is “You Make Me Stronger,” an ode to great partnerships as in the one with the artist, the handle, and the mallet.
In the fall of 2016 I decided to experiment with sculpture materials. I challenged myself to sculpt a new sculpture a week, each week in a different material. As my subject, I chose the German beak crested trumpeter with leg muffs pigeon because he allows me to express a lot of movement and energy. I have many drawings and a bronze sculpture of the German beak trumpeter. From a sculpturing point of view, his feathery feet keep him balanced without a pedestal allowing for lots of the expression of energy and emotion.
It turns out that the bird known in the US as a German beak trumpeter pigeon is the same bird that Picasso drew as the peace dove. Everyone knows His famous "peace doves". This particular pigeon was given to him by Henri Matisse. It is described as a Milanese pigeon. Possibly it was from Milan, but you can tell by the fancy feathers on his feet that it is a German beak-crested trumpeter with leg muffs. In German and French, the term pigeon and dove are interchangeable.
I am no longer committed to sculpt a peace pigeon a week but I don’t hesitate if a material or found object jumps out at me to turn it into a sculpture.
The very last beak break.
MArch 3, 2013 - Woman Suffrage Procession -Inez Milholland
10" X 20" X 30" bronze and distressed gold leaf 2014
Now that I have three pieces in my women’s movement body of work I have decide to alter the title and artist statement of this piece.
March 3, 2013 - Woman Suffrage Procession -Inez Milholland
Riding aside historically represents oppression of women's rights. Suffragette Inez Milholland rode astride in the 1913 ride/march on Washington. Inez was not only protesting for the right to vote, own property, to sue, but also to ride astride.
This is my first piece of work that addresses the women’s movement. It first resonated with me purely from an aesthetic point of view, as I knew the aged leather would reproduce beautifully in bronze. What I did not realize, however, was that this sculpture would represent more than a stereotypical Texas western symbol. In my women’s movement body of art it represents the strength of Victorian women and the beginning of the women’s movement, the March 3, 1913 suffrage parade in Washington.
For more information in the 1913 women’s movement see the links below.
I have very strong views on the connection between agriculture and health. I prefer to only eat organic grass-fed beef. I prefer to not eat any gmo products and I feel best when only eating sprouted grains. I want to know where my food comes from and how it is produced. Agriculture has a huge impact on our personal health as well as on our environment. Roots play a large role in regenerative and sustainable agriculture.
The first root - The root is fabulous all by it’s self.
The trunk is not so fabulous.
Off with the trunk-
Failure #1- Experimenting with ideas- this idea emphasizes the important of roots in sustaining life. - too obvious
Failure #2- Another experiment- “burden” I grabbed this marble sculpture I did a few years ago. I have always wanted to burden it with something on his back.
I like the thought, I think it either needs more more more roots or a Sprout coming out of the root.
The root would be bronze.
Stay tuned to see how I will use the roots.
Flipping around this broken scrap of pig wire and you get so many gestural images.
kiss
tango
waltz
jitter bug
rumba
The welding is complete.
Using the Schlieren Flow Visualization method of photography, scientists photograph sound vibrations (even with them moving at 761.2 miles per hour.) NPR does a beautiful job of explaining this complicated process that scientists use to see sound. See link below-
https://www.npr.org/2014/04/09/300563606/what-does-sound-look-like
It is amazing and inspiring to see photographs/videos of sound. With this additional visual inspiration and conversations with art critic Laura Wellen and curator Kimberley Davenport, I have decided to create an installation in my new studio.
I have moved my “score” (working title) sculpture to my new studio.
Everything else is in a temporary storage facility
I will miss my dogs 😒
With some luck by the end of the summer my new studio will be filled with a 4D installation of the voice of the violin.
photos by Nash Baker
Earlier this week I received the images taken of my sculpture. There is great satisfaction seeing this piece finally photographed. Many many thanks to Nash Baker for taking the time to get the perfect lighting and angles.
I am struggling with the title and the artist statement. This is where I am presently on the Artist statement for the piece. Some possible titles follow. I would appreciate any suggestions
”___________” A three deminsional depiction of the the passage of time through energy, produced by playing contemporary classical music. I was inspired by a long exposure photograph of my cousin, Arkansas Symphony Concert Master Andrew Irvin, that captured multiple images as he played his violin. I was struck by the simple back and forth movements of a bow, composed of horse hair, drawn across strings that create emotionally charged sounds. In this piece, the music radiates off the musician as he plays, as well as off the strings of the violin, sometimes like a painfully slow waltz, and sometimes with the sharpness of a quickstep. Working on the piece during the last weeks of my father’s life I examined each movement of the bow and the wire/sound that comes off the violin. Some warble and then end sharply like a tear running down a cheek. Others gently twist into a whisper that fades into a broken heart, and some linger and then pivot like a murmuration of birds and is set free, each movement triggering a unique emotion. I applied the concept of seeing multiple images, and seeing music as emotional energy in three dimensions. The piece is built on a steel armature covered in plaster, recycled wire cloth, and baling wire.
possible titles
Documents of Time’s passage
Rhythm
Oscillations
“Lost in time”
Sonata
Rhapsody
Movement
Interval
dimensions of time
Intervals in time
Sonatas of time
Scores in Time
score
