Sapling #9 to kindling - finish details

The finish can make or break a sculpture. I decided to lightly ground down the gritty textured surface on the concrete branches and polished the leaves. The highly detailed branches contrast with the simple almost primitive or crude Leaf-like forms. The leaves are smooth except any fingerprints and marks accidentally made by the process. The roughly made leaves have more energy and life than a realistically detailed leaf.

I made the leaves by pouring a thin sheet of wax and then tore leaf shapes out of the wax. Then I crumpled and twisted them Into fall leaves and cast them in bronze.

I made the leaves by pouring a thin sheet of wax and then tore leaf shapes out of the wax. Then I crumpled and twisted them Into fall leaves and cast them in bronze.

The little bird is also highly textured but in a more organized pattern.

The little bird is also highly textured but in a more organized pattern.

I have not made a decision on the stain of the concrete.

I have not made a decision on the stain of the concrete.

Another view

Another view

The base mimics dirt under the tree.

The base mimics dirt under the tree.

Sapling #6 - restore and lath

The only good thing about quarantine is it provides time to finish projects. I need to get my welding area cleared of these faux bois pieces.

Today I am starting back on the faux bois sapling. It has bronze leaves and 1 bronze bird. It is a special request for my daughter Sage. I started it two years ago and had exhibitions that came up that interfered with my completion. Oops-

She is now engaged to be married during the pandemic June 12, 2020. This is little sapling will now for both Sage and Cameron.

I put protective coverings over the bronze pieces.

I put protective coverings over the bronze pieces.

My assistant Tobi is ready to help.- sarcasm

My assistant Tobi is ready to help.- sarcasm

Here I am painting restore on the steel. Restore prevents it from rusting.

Here I am painting restore on the steel. Restore prevents it from rusting.

When you pour it is pink, it turns purple on the steel.

When you pour it is pink, it turns purple on the steel.

purple and bubbles.

purple and bubbles.

After the restore dried I started attaching the lath

After the restore dried I started attaching the lath

The lath th is sharp like a razor blade.wearing protective arm wear, I cut strips of the lath and attach it to the steel with stainless steel wire with airplane safety pliers. The lath can not wiggle. The concrete liquifies with movement so the lath has to be tight and firm.

Faux bois Wedding gift ❤️❤️#15.5

I decided I should include a copy of Bob Pa’s obituary. It is one of the most touching obituaries I have ever read. My brothers and sister compile the information and my nephew and amazing writer Barrett Travis who now lives In Milwaukee wove the information into the last story of my dads life.

Obit’

With sadness, the family of Robert Ira Travis announceshis passing on March 24, 2018, at the age of 90. He was born to the late Gene Louise Young and Robert Fleming Travis on December 10, 1927.

 

Bobby attended Austin high school, graduating in the class of 1946, where he excelled in football, basketball, and track. After high school, he enlisted in the Army and was stationed in the 11th Weather Squadron in the Aleutian Islands, Alaska. He then attended Texas Western, now known as UTEP, where he was a brother in the Phi Tau fraternity.

 

Starting his family, he managed one of the farms in the lower valley owned by his grandfather, Robert Fleming Travis Senior. From 1951 through 1964 he was one of the pioneering farmers who helped utilize water pumps to establish the large acreage of Dell City for cotton farming, a foundational industry for the small town that continues to this day. He was also a rider on the Dell City Cowboy Polo team, which brought home a world title in the early 1960s. He additionally farmed in Laredo, Texas from 1964 to 1966.

 

In his early forties, he took over the Valley Feed store on North Loop Drive in El Paso, Texas, which grew during his life time from a small store front and warehouse in an inauspicious strip mall to become the Pet’s Barn chain of pet food and supply stores with 24 locations in El Paso, San Antonio, and Las Cruces.

 

While he was a great sports fan, especially fond of the patient, strategic pace of a Diablos baseball game (and attending cold beer, Diablo dog, and peanuts), he was a greater fan of people. He liked to drive his pick-up truck from store to store in El Paso, ostensibly to make deliveries, but it was pretty clear his aim was to connect with employees and remind them all to always keep a comb and pocket knife handy. It is quite possible that there is not a road in El Paso he has not driven in search of a good meal and good conversation.

 

It was his way to connect with others over food, and he was a connoisseur of El Paso cuisine. On his rounds, he scouted the city for locally owned gems to share with those he loved. He was a fine cook as well, especially known for his smoked meats, and knew that care and attention to detail could make any meal, from a 20 hourbrisket to a simple bowl of corn flakes, memorable.

 

Bobby was a self-starter with an independent streak, and while fortune did not always shine on his ambitions, he possessed the resilience and (he’d insist) plain dumb luck to build a lasting legacy. Not just in the business he helpedstart, but in the wit, wisdom, and love he shared with friends and family.

 

He is survived by sons Bob Travis (partner Terri Sanderson) and Dean Travis (partner Linda Razloznik)  (El Paso); daughters Cindee Klement (husband Curtis) (Houston) and Janet Fortune; and his son-in-law Craig Fortune (El Paso); grandchildren Barrett Travis (partner Amber Giese) (Milwaukee, Wisconsin), Eric Travis (wife Josette) (El Paso), Aaron Travis (San Antonio), Nicole Ramirez (husband Renee)  (Columbus, Ohio), Kyle Razloznik, Ryan Razloznik (wife Shellie) (San Antonio), Griffin Klement (wife Alex Groome) (College Station), Sage Klement (Houston), Travis Fortune (El Paso), and Reese Fortune (El Paso); sister Genie Lou Irvin (husband Widgie) (Columbia, Missouri); brother Warren Travis (San Francisco, California); great-grandchildren  Abby, Emma and Danica Travis, Adam Hernandez and Julian Perez (El Paso), Collin Travis (Milwaukee, Wisconsin), Aiden and Harper Razloznik (San Antonio), and Evan Ramirez (Columbus, Ohio); and brother- and sister-in-lawsRobert and Mary Earp (El Paso).

 

A wake will be held in the warehouse of Pet’s Barn at 368 Yarbrough, El Paso, on 

Sunday May 6th, 2018 at 2:00 pm, where his family and friends are invited to celebrate his life.

 

Memorial funds may be donated to the Animal Rescue League of El Paso, 7256 La Junta Dr., Canutillo, Texas79835, www.arlep.org/. 915-877-3785,  

 

His family extends a special heartfelt thanks to Christina Rodriguez, whose care throughout the years made it possible for him to live at home, and to Eileen Carbajal, whose endless personal assistance and friendship throughout the years relieved him of daily worries and helped to maintain the independence he valued so greatly. 

 

“You’ll remember me when the west wind moves 

upon the fields of barley. You can tell the sun 

in his jealous sky when we walked in fields of gold.”

 

 

A few images from the wake held in the feed store warehouse as he requested.

Daddy always had a few tomato plants growing in a pot. We decorated the tables with celebrity tomato plants to be taken home in by those who came to celebrate his life. We had each one in a brown bag. The same type and size of the container that one…

Daddy always had a few tomato plants growing in a pot. We decorated the tables with celebrity tomato plants to be taken home in by those who came to celebrate his life. We had each one in a brown bag. The same type and size of the container that one would keep a big bottle of Coors beer inside their truck. The brown bag has meaning to my siblings and me.

The feed store warehouse wake.

The feed store warehouse wake.

From left my oldest brother Bob, my baby sister Janet Fortune, my brother Dean and his dog Johnny and me. Front and center in the born and raised bag my father’s ashes in 3 big containers and one tiny container.

From left my oldest brother Bob, my baby sister Janet Fortune, my brother Dean and his dog Johnny and me. Front and center in the born and raised bag my father’s ashes in 3 big containers and one tiny container.

Faux bois Wedding gift ❤️❤️#15

Today I poured 30 lbs. of white concrete and 29.5 lbs. of grey Portland for the seat. In the mix was .5 lbs. of the ashes of Robert Ira Travis, my dad. He was born on December 10, 1927 he passed away March 24, 2018. When I measured out the ashes thIs small metal piece was in his ashes. I think it must have been part of one of his four hip replacements or two knee replacements. It was like finding the toy in a box of cracker jacks. I think Griffin and Alex will enjoy it embedded in their piece.

Bolt, name and ashes of R.I. Travis.

Bolt, name and ashes of R.I. Travis.

I used the white concrete to create motion in the old wood.

I used the white concrete to create motion in the old wood.

I went a little crazy

I went a little crazy

The seat has lots of rings from burls in the plank. Griffin and Alex love bugs and mushrooms (the fruit of fungi) both of which cause burls. The seat of their bench is riddled with big burls.

A sweet knot with some severe old wood cracks.

A sweet knot with some severe old wood cracks.

Once the piece hydrates for 5 days I will take a sander and smooth down the seat.

IMG_7797.jpeg
I gave the birds a knot to perch on.

I gave the birds a knot to perch on.

Another view of Bob Pa’s moment in the bench.

Another view of Bob Pa’s moment in the bench.

Every few hours I check on the marks to make sure they have not filled in. There is a lot of concrete on the seat and the white concrete is taking a long time to set.

“ Score” #12 armature/fingers to hold the violin.

IMG_6562.JPG

Here is a pattern I made to Help me gauge how big each finger section should be. 

 

IMG_6564.JPG

Here I have tacked the first and second joints.  

Once I decide if I like the placement of each joint then I will strengthen the welds.   

FullSizeRender.jpg

The fingers on both hands seem to be ok. Hopefully when the lath and concrete are added I will still be happy.